Register 129: EPI Deep-Sleep Mode Clock Gating Control (DCGCEPI), offset
0x810
The DCGCEPI register provides software the capability to enable and disable the EPI module in
deep-sleep mode. When enabled, a module is provided a clock. When disabled, the clock is disabled
to save power.
Important: This register should be used to control the clocking for the EPI module.
EPI Deep-Sleep Mode Clock Gating Control (DCGCEPI)
Base 0x400F.E000
Offset 0x810
Type RW, reset 0x0000.0000
16171819202122232425262728293031
reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
0123456789101112131415
D0reserved
RWROROROROROROROROROROROROROROROType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved31:1
EPI Module Deep-Sleep Mode Clock Gating Control
DescriptionValue
EPI module is disabled in deep-sleep mode.0
Enable and provide a clock to the EPI module in deep-sleep
mode.
1
0RWD00
June 18, 2014434
Texas Instruments-Production Data
System Control
To Next Page
Loading...
