Register 26: I
2
C Peripheral Properties (I2CPP), offset 0xFC0
The I2CPP register provides information regarding the properties of the I
2
C module.
I2C Peripheral Properties (I2CPP)
I2C 0 base: 0x4002.0000
I2C 1 base: 0x4002.1000
I2C 2 base: 0x4002.2000
I2C 3 base: 0x4002.3000
I2C 4 base: 0x400C.0000
I2C 5 base: 0x400C.1000
I2C 6 base: 0x400C.2000
I2C 7 base: 0x400C.3000
I2C 8 base: 0x400B.8000
I2C 9 base: 0x400B.9000
Offset 0xFC0
Type RO, reset 0x0000.0001
16171819202122232425262728293031
reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
0123456789101112131415
HSreserved
ROROROROROROROROROROROROROROROROType
1000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x0ROreserved31:1
High-Speed Capable
DescriptionValue
The interface is capable of Standard, Fast, or Fast mode plus
operation.
0
The interface is capable of High-Speed operation.1
0x1ROHS0
June 18, 20141354
Texas Instruments-Production Data
Inter-Integrated Circuit (I
2
C) Interface
To Next Page
Loading...
Need help?
General
