EasyManua.ls Logo

Texas Instruments TM4C1294NCPDT - Texas Instruments-Production Data

Texas Instruments TM4C1294NCPDT
1890 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved31:15
GPIO Port Q Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port Q is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port Q is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP1414
GPIO Port P Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port P is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port P is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP1313
GPIO Port N Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port N is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port N is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP1212
GPIO Port M Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port M is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port M is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP1111
457June 18, 2014
Texas Instruments-Production Data
Tiva
TM4C1294NCPDT Microcontroller

Table of Contents

Related product manuals