EasyManua.ls Logo

Texas Instruments TM4C1294NCPDT - Texas Instruments-Production Data

Texas Instruments TM4C1294NCPDT
1890 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved31:8
UART Module 7 Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCUART, SCGCUART or DCGCUART register is clear.
DescriptionValue
The UART module 7 is not powered and does not receive a
clock. In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
The UART module 7 is powered, but does not receive a clock.
In this case, the module is inactive.
1
1RWP77
UART Module 6 Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCUART, SCGCUART or DCGCUART register is clear.
DescriptionValue
The UART module 6 is not powered and does not receive a
clock. In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
The UART module 6 is powered, but does not receive a clock.
In this case, the module is inactive.
1
1RWP66
UART Module 5 Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCUART, SCGCUART or DCGCUART register is clear.
DescriptionValue
The UART module 5 is not powered and does not receive a
clock. In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
The UART module 5 is powered, but does not receive a clock.
In this case, the module is inactive.
1
1RWP55
UART Module 4 Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCUART, SCGCUART or DCGCUART register is clear.
DescriptionValue
The UART module 4 is not powered and does not receive a
clock. In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
The UART module 4 is powered, but does not receive a clock.
In this case, the module is inactive.
1
1RWP44
June 18, 2014468
Texas Instruments-Production Data
System Control

Table of Contents

Related product manuals