DescriptionResetTypeNameBit/Field
UART Module 3 Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCUART, SCGCUART or DCGCUART register is clear.
DescriptionValue
The UART module 3 is not powered and does not receive a
clock. In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
The UART module 3 is powered, but does not receive a clock.
In this case, the module is inactive.
1
1RWP33
UART Module 2 Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCUART, SCGCUART or DCGCUART register is clear.
DescriptionValue
The UART module 2 is not powered and does not receive a
clock. In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
The UART module 2 is powered, but does not receive a clock.
In this case, the module is inactive.
1
1RWP22
UART Module 1 Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCUART, SCGCUART or DCGCUART register is clear.
DescriptionValue
The UART module 1 is not powered and does not receive a
clock. In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
The UART module 1 is powered, but does not receive a clock.
In this case, the module is inactive.
1
1RWP11
UART Module 0 Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCUART, SCGCUART or DCGCUART register is clear.
DescriptionValue
The UART module 0 is not powered and does not receive a
clock. In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
The UART module 0 is powered, but does not receive a clock.
In this case, the module is inactive.
1
1RWP00
469June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller
To Next Page
Loading...
Need help?
General
