Texas Instruments TM4C1294NCPDT - Texas Instruments-Production Data

DescriptionResetTypeNameBit/Field
Main Oscillator Failure Interrupt Mask
DescriptionValue
The MOFRIS interrupt is suppressed and not sent to the interrupt
controller.
0
An interrupt is sent to the interrupt controller when the MOFRIS
bit in the RIS register is set.
1
0RWMOFIM3
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved2
Brown-Out Reset Interrupt Mask
DescriptionValue
The BORRIS interrupt is suppressed and not sent to the interrupt
controller.
0
An interrupt is sent to the interrupt controller when the BORRIS
bit in the RIS register is set.
1
0RWBORIM1
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved0
June 18, 2014264
Texas Instruments-Production Data
System Control