Register 2: CRC SEED/Context (CRCSEED), offset 0x410
The CRC SEED/Context (CRCSEED) register is initially written with one of the following three
values depending on the encoding of the INIT field in the CRCCTRL register:
■ The context value written to the CRCSEED register. This encoding is for SEED values from a
previous CRC calculation or a specific protocol. (INIT=0x0)
■ 0x0000.0000 (INIT=0x2)
■ 0x1111.1111 (INIT=0x3)
CRC SEED/Context (CRCSEED)
Base 0x4403.0000
Offset 0x410
Type RW, reset 0x0000.0000
16171819202122232425262728293031
SEED
RWRWRWRWRWRWRWRWRWRWRWRWRWRWRWRWType
0000000000000000Reset
0123456789101112131415
SEED
RWRWRWRWRWRWRWRWRWRWRWRWRWRWRWRWType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
SEED/Context Value
This register contains the starting seed of the CRC and checksum
operation. This register also holds the latest result of CRC or checksum
operation.
0x0000.0000RWSEED31:0
June 18, 2014952
Texas Instruments-Production Data
Cyclical Redundancy Check (CRC)
To Next Page
Loading...
Need help?
General
