DescriptionResetTypeNameBit/Field
Watchdog Timer 1 Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCWD, SCGCWD or DCGCWD register is clear.
DescriptionValue
Watchdog Timer 1 module is not powered and does not receive
a clock. In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
Watchdog Timer 1 module is powered, but does not receive a
clock. In this case, the module is inactive.
1
1RWP11
Watchdog Timer 0 Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCWD, SCGCWD or DCGCWD register is clear.
DescriptionValue
Watchdog Timer 0 module is not powered and does not receive
a clock. In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
Watchdog Timer 0 module is powered, but does not receive a
clock. In this case, the module is inactive.
1
1RWP00
June 18, 2014452
Texas Instruments-Production Data
System Control
To Next Page
Loading...
Need help?
General
