DescriptionResetTypeNameBit/Field
Ethernet MAC Module 0 Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCEMAC, SCGCEMAC or DCGCEMAC register is clear.
DescriptionValue
Ethernet MAC Module 0 is not powered and does not receive
a clock. In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
Ethernet MAC module 0 is powered, but does not receive a
clock. In this case, the module is inactive.
1
1RWP00
495June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller
To Next Page
Loading...
Need help?
General
