DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved31:1
EPI Module Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCEPI, SCGCEPI or DCGCEPI register is clear.
DescriptionValue
The EPI module is not powered and does not receive a clock.
In this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
The EPI module is powered, but does not receive a clock. In
this case, the module is inactive.
1
1RWP00
June 18, 2014464
Texas Instruments-Production Data
System Control
To Next Page
Loading...
Need help?
General
