DescriptionResetTypeNameBit/Field
Main Oscillator Failure Raw Interrupt Status
DescriptionValue
The main oscillator has not failed.0
The MOSCIM bit in the MOSCCTL register is set and the main
oscillator has failed.
1
This bit is cleared by writing a 1 to the MOFMIS bit in the MISC register.
0ROMOFRIS3
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved2
Brown-Out Reset Raw Interrupt Status
DescriptionValue
A brown-out condition is not currently active.0
A brown-out condition is currently active.1
The appropriate BOR bit in the PTBOCTL register must be set to an
interrupt (0x1) encoding in order to generate an interrupt.
This bit is cleared by writing a 1 to the BORMIS bit in the MISC register.
0ROBORRIS1
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved0
June 18, 2014262
Texas Instruments-Production Data
System Control
To Next Page
Loading...
Need help?
General
