Texas Instruments TM4C1294NCPDT - Register 9: PWM Status (PWMSTATUS), Offset 0 X020

Register 9: PWM Status (PWMSTATUS), offset 0x020
This register provides the unlatched status of the PWM generator fault condition.
PWM Status (PWMSTATUS)
PWM0 base: 0x4002.8000
Offset 0x020
Type RO, reset 0x0000.0000
16171819202122232425262728293031
reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
0123456789101112131415
FAULT0FAULT1FAULT2FAULT3reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x0000.000ROreserved31:4
Generator 3 Fault Status
DescriptionValue
The fault condition for PWM generator 3 is not asserted.0
The fault condition for PWM generator 3 is asserted.
If the FLTSRC bit in the PWM3CTL register is clear, the input
is the source of the fault condition, and is therefore asserted.
1
0ROFAULT33
Generator 2 Fault Status
DescriptionValue
The fault condition for PWM generator 2 is not asserted.0
The fault condition for PWM generator 2 is asserted.
If the FLTSRC bit in the PWM2CTL register is clear, the input
is the source of the fault condition, and is therefore asserted.
1
0ROFAULT22
Generator 1 Fault Status
DescriptionValue
The fault condition for PWM generator 1 is not asserted.0
The fault condition for PWM generator 1 is asserted.
If the FLTSRC bit in the PWM1CTL register is clear, the input
is the source of the fault condition, and is therefore asserted.
1
0ROFAULT11
June 18, 20141700
Texas Instruments-Production Data
Pulse Width Modulator (PWM)