Register 9: EPI Host-Bus 16 Configuration 2 (EPIHB16CFG2), offset 0x014
Important: The MODE field in the EPICFG register determines which configuration register is
accessed for offsets 0x010 and 0x014.
To access EPIHB16CFG2, the MODE field must be 0x3.
This register is used to configure operation while in Host-Bus 16 mode. Note that this register is
reset when the MODE field in the EPICFG register is changed. If another mode is selected and the
Host-Bus 16 mode is selected again, the values must be reinitialized.
EPI Host-Bus 16 Configuration 2 (EPIHB16CFG2)
Base 0x400D.0000
Offset 0x014
Type RW, reset 0x0008.0000
16171819202122232425262728293031
BURSTRDCREWRCREALEHIGHRDHIGHWRHIGHreservedCSCFGCSBAUD
CSCFGEXT
reserved
RWRWRWRWRWRWRORORWRWRWRWROROROROType
0001000000000000Reset
0123456789101112131415
MODEreservedRDWSWRWSreserved
RWRWRORORWRWRWRWROROROROROROROROType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved31:28
885June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller
To Next Page
Loading...
Need help?
General
