DescriptionResetTypeNameBit/Field
GPIO Port G Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port G is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port G is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP66
GPIO Port F Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port F is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port F is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP55
GPIO Port E Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port E is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port E is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP44
GPIO Port D Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port D is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port D is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP33
459June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller
To Next Page
Loading...
Need help?
General
