DescriptionResetTypeNameBit/Field
GPIO Port L Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port L is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port L is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP1010
GPIO Port K Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port K is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port K is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP99
GPIO Port J Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port J is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port J is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP88
GPIO Port H Power Control
The Pn bit encodings are not applicable if the corresponding bit in the
RCGCGPIO, SCGCGPIO or DCGCGPIO register is clear.
DescriptionValue
GPIO Port H is not powered and does not receive a clock. In
this case, the module's state is not retained.
This configuration provides the lowest power consumption state.
0
GPIO Port H is powered, but does not receive a clock. In this
case, the module is inactive.
1
1RWP77
June 18, 2014458
Texas Instruments-Production Data
System Control
To Next Page
Loading...
Need help?
General
