Register 5: GPTM Synchronize (GPTMSYNC), offset 0x010
Note: This register is only implemented on GPTM Module 0 only.
This register allows software to synchronize a number of timers.
GPTM Synchronize (GPTMSYNC)
16/32-bit Timer 0 base: 0x4003.0000
16/32-bit Timer 1 base: 0x4003.1000
16/32-bit Timer 2 base: 0x4003.2000
16/32-bit Timer 3 base: 0x4003.3000
16/32-bit Timer 4 base: 0x4003.4000
16/32-bit Timer 5 base: 0x4003.5000
16/32-bit Timer 6 base: 0x400E.0000
16/32-bit Timer 7 base: 0x400E.1000
Offset 0x010
Type RW, reset 0x0000.0000
16171819202122232425262728293031
reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
0123456789101112131415
SYNCT0SYNCT1SYNCT2SYNCT3SYNCT4SYNCT5SYNCT6SYNCT7
WOWOWOWOWOWOWOWOWOWOWOWOWOWOWOWOType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x00ROreserved31:16
Synchronize GPTM Timer 7
DescriptionValue
GPT7 is not affected.0x0
A timeout event for Timer A of GPTM7 is triggered.0x1
A timeout event for Timer B of GPTM7 is triggered.0x2
A timeout event for both Timer A and Timer B of GPTM7 is
triggered.
0x3
0x0WOSYNCT715:14
Synchronize GPTM Timer 6
DescriptionValue
GPTM6 is not affected.0x0
A timeout event for Timer A of GPTM6 is triggered.0x1
A timeout event for Timer B of GPTM6 is triggered.0x2
A timeout event for both Timer A and Timer B of GPTM6 is
triggered.
0x3
0x0WOSYNCT613:12
June 18, 2014990
Texas Instruments-Production Data
General-Purpose Timers
To Next Page
Loading...
Need help?
General
