DescriptionResetTypeNameBit/Field
VLDO Value Below Minimum Error in Deep-Sleep Mode
DescriptionValue
No error.0
An error has occurred because software has requested that the
LDO voltage be below the minimum value allowed using the
VLDO bit in the LDODPCTL register.
In this situation, the LDO voltage is not changed when entering
Deep-Sleep mode.
1
0ROLDMINERR3
PIOSC Power Down Request Error
DescriptionValue
No error.0
An error has occurred because software has requested that the
PIOSC be powered down during Deep-Sleep and it is not
possible to power down the PIOSC.
In this situation, the PIOSC is not powered down when entering
Deep-Sleep mode.
1
0ROPPDERR2
Flash Memory Power Down Request Error
DescriptionValue
No error.0
An error has occurred because software has requested a Flash
memory power down mode that is not available using the
FLASHPM field in the SLPPWRCFG or the DSLPPWRCFG
register.
1
0ROFPDERR1
SRAM Power Down Request Error
DescriptionValue
No error.0
An error has occurred because software has requested an
SRAM power down mode that is not available using the SRAMPM
field in the SLPPWRCFG or the DSLPPWRCFG register.
1
0ROSPDERR0
June 18, 2014308
Texas Instruments-Production Data
System Control
To Next Page
Loading...
Need help?
General
