Register 43: ADC Sample Sequence 3 Operation (ADCSSOP3), offset 0x0B0
This register determines whether the sample from the given conversion on Sample Sequence 3 is
saved in the Sample Sequence 3 FIFO or sent to the digital comparator unit.
ADC Sample Sequence 3 Operation (ADCSSOP3)
ADC0 base: 0x4003.8000
ADC1 base: 0x4003.9000
Offset 0x0B0
Type RW, reset 0x0000.0000
16171819202122232425262728293031
reserved
ROROROROROROROROROROROROROROROROType
0000000000000000Reset
0123456789101112131415
S0DCOPreserved
RWROROROROROROROROROROROROROROROType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x0000.000ROreserved31:1
Sample 0 Digital Comparator Operation
DescriptionValue
The sample is saved in Sample Sequence FIFO3.0
The sample is sent to the digital comparator unit specified by
the S0DCSEL bit in the ADCSSDC03 register, and the value is
not written to the FIFO.
1
0RWS0DCOP0
June 18, 20141144
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
To Next Page
Loading...
Need help?
General
