Texas Instruments TM4C1294NCPDT User Manual

DescriptionResetTypeNameBit/Field
Watchdog Interrupt Type
The INTTYPE values are defined as follows:
DescriptionValue
Watchdog interrupt is a standard interrupt.0
Watchdog interrupt is a non-maskable interrupt.1
0RWINTTYPE2
Watchdog Reset Enable
The RESEN values are defined as follows:
DescriptionValue
Disabled.0
Enable the Watchdog module reset output.
Setting this bit enables the Watchdog Timer.
1
0RWRESEN1
Watchdog Interrupt Enable
The INTEN values are defined as follows:
DescriptionValue
Interrupt event disabled. Once this bit is set, it can only be
cleared by a hardware reset or a software reset initiated by
setting the appropriate bit in the Watchdog Timer Software
Reset (SRWD) register.
0
Interrupt event enabled. Once enabled, all writes are ignored.
Setting this bit enables the Watchdog Timer.
1
0RWINTEN0
1035June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller

Texas Instruments TM4C1294NCPDT Specifications

General

Brand	Texas Instruments
Model	TM4C1294NCPDT
Category	Microcontrollers
Language	English