Texas Instruments TM4C1294NCPDT - Page 1078

DescriptionResetTypeNameBit/Field
ADC SS1 DMA Enable
DescriptionValue
DMA for Sample Sequencer 1 is disabled.0
DMA for Sample Sequencer 1 is enabled.1
0RWADEN19
ADC SS1 DMA Enable
DescriptionValue
DMA for Sample Sequencer 1 is disabled.0
DMA for Sample Sequencer 1 is enabled.1
0RWADEN08
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved7:4
ADC SS3 Enable
DescriptionValue
Sample Sequencer 3 is disabled.0
Sample Sequencer 3 is enabled.1
0RWASEN33
ADC SS2 Enable
DescriptionValue
Sample Sequencer 2 is disabled.0
Sample Sequencer 2 is enabled.1
0RWASEN22
ADC SS1 Enable
DescriptionValue
Sample Sequencer 1 is disabled.0
Sample Sequencer 1 is enabled.1
0RWASEN11
ADC SS0 Enable
DescriptionValue
Sample Sequencer 0 is disabled.0
Sample Sequencer 0 is enabled.1
0RWASEN00
June 18, 20141078
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)