Texas Instruments TM4C1294NCPDT - Page 1084

DescriptionResetTypeNameBit/Field
SS0 DMA Interrupt Mask
DescriptionValue
The status of Sample Sequencer 0 DMA does not affect the
SS0 interrupt status.
0
The raw interrupt signal from Sample Sequencer 0 DMA
(ADCRIS register DMAINR0 bit) is sent to the interrupt controller.
1
0RWDMAMASK08
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved7:4
SS3 Interrupt Mask
DescriptionValue
The status of Sample Sequencer 3 does not affect the SS3
interrupt status.
0
The raw interrupt signal from Sample Sequencer 3 (ADCRIS
register INR3 bit) is sent to the interrupt controller.
1
0RWMASK33
SS2 Interrupt Mask
DescriptionValue
The status of Sample Sequencer 2 does not affect the SS2
interrupt status.
0
The raw interrupt signal from Sample Sequencer 2 (ADCRIS
register INR2 bit) is sent to the interrupt controller.
1
0RWMASK22
SS1 Interrupt Mask
DescriptionValue
The status of Sample Sequencer 1 does not affect the SS1
interrupt status.
0
The raw interrupt signal from Sample Sequencer 1 (ADCRIS
register INR1 bit) is sent to the interrupt controller.
1
0RWMASK11
SS0 Interrupt Mask
DescriptionValue
The status of Sample Sequencer 0 does not affect the SS0
interrupt status.
0
The raw interrupt signal from Sample Sequencer 0 (ADCRIS
register INR0 bit) is sent to the interrupt controller.
1
0RWMASK00
June 18, 20141084
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)