Texas Instruments TM4C1294NCPDT - Page 1104

DescriptionResetTypeNameBit/Field
SS3 Initiate
DescriptionValue
No effect.0
Begin sampling on Sample Sequencer 3, if the sequencer is
enabled in the ADCACTSS register.
1
Only a write by software is valid; a read of this register returns no
meaningful data.
-WOSS33
SS2 Initiate
DescriptionValue
No effect.0
Begin sampling on Sample Sequencer 2, if the sequencer is
enabled in the ADCACTSS register.
1
Only a write by software is valid; a read of this register returns no
meaningful data.
-WOSS22
SS1 Initiate
DescriptionValue
No effect.0
Begin sampling on Sample Sequencer 1, if the sequencer is
enabled in the ADCACTSS register.
1
Only a write by software is valid; a read of this register returns no
meaningful data.
-WOSS11
SS0 Initiate
DescriptionValue
No effect.0
Begin sampling on Sample Sequencer 0, if the sequencer is
enabled in the ADCACTSS register.
1
Only a write by software is valid; a read of this register returns no
meaningful data.
-WOSS00
June 18, 20141104
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)