DescriptionResetTypeNameBit/Field
ADC Channel Count
This field specifies the number of ADC input channels available to the
converter. This field is encoded as a binary value, in the range of 0 to
63.
This field provides similar information to the legacy DC3 and DC8 register
ADCnAINn bits.
0x14ROCH9:4
Maximum Conversion Rate
This field specifies the maximum value that may be programmed into
the ADCPC register's CR field.
DescriptionValue
Reserved0x0-0x6
Full conversion rate (F
CONV
) as defined by T
ADC
and N
SH
.0x7
Reserved0x8 - 0xF
0x7ROMCR3:0
June 18, 20141158
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
To Next Page
Loading...
Need help?
General
