Texas Instruments TM4C1294NCPDT - Page 1381

DescriptionResetTypeNameBit/Field
Error Passive
DescriptionValue
The CAN module is in the Error Active state, that is, the
receive or transmit error count is less than or equal to 127.
0
The CAN module is in the Error Passive state, that is, the
receive or transmit error count is greater than 127.
1
0ROEPASS5
Received a Message Successfully
DescriptionValue
Since this bit was last cleared, no message has been
successfully received.
0
Since this bit was last cleared, a message has been
successfully received, independent of the result of the
acceptance filtering.
1
This bit must be cleared by writing a 0 to it.
0RWRXOK4
Transmitted a Message Successfully
DescriptionValue
Since this bit was last cleared, no message has been
successfully transmitted.
0
Since this bit was last cleared, a message has been
successfully transmitted error-free and acknowledged by
at least one other node.
1
This bit must be cleared by writing a 0 to it.
0RWTXOK3
1381June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller