Texas Instruments TM4C1294NCPDT User Manual

DescriptionResetTypeNameBit/Field
Loopback Mode
DescriptionValue
Loopback mode is disabled.0
Loopback mode is enabled. In loopback mode, the data
from the transmitter is routed into the receiver. Any data
on the receive input is ignored.
1
0RWLBACK4
Silent Mode
DescriptionValue
Silent mode is disabled.0
Silent mode is enabled. In silent mode, the CAN controller
does not transmit data but instead monitors the bus. This
mode is also known as Bus Monitor mode.
1
0RWSILENT3
Basic Mode
DescriptionValue
Basic mode is disabled.0
Basic mode is enabled. In basic mode, software should
use the CANIF1 registers as the transmit buffer and use
the CANIF2 registers as the receive buffer.
1
0RWBASIC2
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x0ROreserved1:0
1387June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller

Texas Instruments TM4C1294NCPDT Specifications

General

Brand	Texas Instruments
Model	TM4C1294NCPDT
Category	Microcontrollers
Language	English