EasyManua.ls Logo

Texas Instruments TM4C1294NCPDT - Page 1593

Texas Instruments TM4C1294NCPDT
1890 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DescriptionResetTypeNameBit/Field
Preamble Suppression Capable
DescriptionValue
The device does not perform management transactions with
preambles suppressed.
0
The device performs management transactions with preambles
suppressed. For this mode, the 32-bits of preamble are needed
only once after reset, invalid opcode or invalid turnaround.
1
1ROMFPRESUP6
Auto-Negotiation Complete
DescriptionValue
Auto-Negotiation process not complete (either still in process,
disabled, or reset)
0
Auto-Negotiation process complete.1
0ROANC5
Remote Fault
DescriptionValue
No remote fault condition detected.0
Remote Fault condition detected (cleared on read or by reset).
Fault criteria: Far End Fault Indication or notification from Link
Partner of Remote Fault.
1
0RORFAULT4
Auto Negotiation Enabled
DescriptionValue
Device is not able to perform Auto-Negotiation.0
Device is able to perform Auto-Negotiation.1
1ROANEN3
Link Status
DescriptionValue
Link not established.0
Valid link established (for either 10 or 100Mbs operation).1
0ROLINKSTAT2
Jabber Detect
This bit is implemented with a latching function, such that the occurrence
of a jabber condition causes it to set until it is cleared by a read from
this register, by the management interface, or by a reset.
DescriptionValue
No Jabber condition detected.0
Jabber condition detected1
0ROJABBER1
1593June 18, 2014
Texas Instruments-Production Data
Tiva
TM4C1294NCPDT Microcontroller

Table of Contents

Related product manuals