DescriptionResetTypeNameBit/Field
Toggle
Toggle is used by the Arbitration function within Auto-Negotiation to
synchronize with the Link Partner during Next Page exchange. This bit
always takes the opposite value of the Toggle bit in the previously
exchanged Link Code Word
DescriptionValue
Value of toggle bit in previously transmitted Link Code Word
was 1.
0
Value of toggle bit in previously transmitted Link Code Word
was 0.
1
0ROTOG11
Code
This field represents the code field of the next page transmission. If the
MP bit is set (bit 13 of this RW register), then the code is interpreted as
a Message Page, as defined in annex 28C of IEEE 802.3u. Otherwise,
the code is interpreted as an Unformatted Page, and the interpretation
is application specific.
The default value of the CODE represents a Null Page as defined in
Annex 28C of IEEE 802.3u.
0x0ROCODE10:0
1605June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller
To Next Page
Loading...
Need help?
General
