DescriptionResetTypeNameBit/Field
Device Address
In general, these bits [4:0] are the device address DEVAD that directs
any accesses of EPHYADDAR register (0x00E) to the appropriate MMD.
The PHY uses the vendor specific DEVAD [4:0] = 0x1F for accesses.
All accesses through registers EPHYREGCR and EPHYADDAR should
use this DEVAD. Transactions with other DEVAD are ignored.
0x0WODEVAD4:0
June 18, 20141614
Texas Instruments-Production Data
Ethernet Controller
To Next Page
Loading...
