Texas Instruments TM4C1294NCPDT User Manual

DescriptionResetTypeNameBit/Field
Sleep Mode Event Interrupt
Reading this bit clears the interrupt.
DescriptionValue
No sleep mode event pending.0
Sleep Mode event interrupt is pending.1
0ROSLEEP10
Polarity Changed Interrupt
Reading this bit clears the interrupt.
DescriptionValue
No Data polarity event pending.0
Data polarity changed interrupt pending.1
0ROPOLINT9
Jabber Detect Event Interrupt
Reading this bit clears the interrupt.
DescriptionValue
No Jabber detect event pending0
Jabber detect event interrupt pending.1
0ROJABBER8
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved7
Auto-Negotiation Error Interrupt Enable
DescriptionValue
Auto-Negotiation error event interrupt disabled.0
Enable interrupt on Auto-Negotiation error event1
0RWANERREN6
Page Receive Interrupt Enable
DescriptionValue
Page Receive error event interrupt disabled.0
Page receive event interrupt enabled.1
0RWPAGERXEN5
Loopback FIFO Overflow/Underflow Interrupt Enable
DescriptionValue
Loopback FIFO overflow/underflow event interrupt disabled0
Loopback FIFO overflow/underflow event interrupt enabled.1
0RWLBFIFOEN4
June 18, 20141626
Texas Instruments-Production Data
Ethernet Controller

Texas Instruments TM4C1294NCPDT Specifications

General

Brand	Texas Instruments
Model	TM4C1294NCPDT
Category	Microcontrollers
Language	English