Texas Instruments TM4C1294NCPDT - Page 1693

DescriptionResetTypeNameBit/Field
Interrupt Fault 0
DescriptionValue
The fault condition for PWM generator 0 is suppressed and not
sent to the interrupt controller.
0
An interrupt is sent to the interrupt controller when the fault
condition for PWM generator 0 is asserted.
1
0RWINTFAULT016
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x000ROreserved15:4
PWM3 Interrupt Enable
DescriptionValue
The PWM generator 3 interrupt is suppressed and not sent to
the interrupt controller.
0
An interrupt is sent to the interrupt controller when the PWM
generator 3 block asserts an interrupt.
1
0RWINTPWM33
PWM2 Interrupt Enable
DescriptionValue
The PWM generator 2 interrupt is suppressed and not sent to
the interrupt controller.
0
An interrupt is sent to the interrupt controller when the PWM
generator 2 block asserts an interrupt.
1
0RWINTPWM22
PWM1 Interrupt Enable
DescriptionValue
The PWM generator 1 interrupt is suppressed and not sent to
the interrupt controller.
0
An interrupt is sent to the interrupt controller when the PWM
generator 1 block asserts an interrupt.
1
0RWINTPWM11
PWM0 Interrupt Enable
DescriptionValue
The PWM generator 0 interrupt is suppressed and not sent to
the interrupt controller.
0
An interrupt is sent to the interrupt controller when the PWM
generator 0 block asserts an interrupt.
1
0RWINTPWM00
1693June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller