EasyManuals Logo

Texas Instruments TM4C1294NCPDT User Manual

Texas Instruments TM4C1294NCPDT
1890 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1695 background imageLoading...
Page #1695 background image
DescriptionResetTypeNameBit/Field
Interrupt Fault PWM 1
DescriptionValue
The fault condition for PWM generator 1 has not been asserted.0
The fault condition for PWM generator 1 is asserted.1
Note: If the LATCH bit is set in the PWM1CTL register, the
INTFAULT1 bit in this register can be cleared by writing a 1
to the INTFAULT1 bit in the PWMISC register. If the LATCH
bit is 0 in the PWM1CTL register, writing a 1 to the
INTFAULT1 bit in the PWMISC register has no effect.
0ROINTFAULT117
Interrupt Fault PWM 0
DescriptionValue
The fault condition for PWM generator 0 has not been asserted.0
The fault condition for PWM generator 0 is asserted.1
Note: If the LATCH bit is set in the PWM0CTL register, the
INTFAULT0 bit in this register can be cleared by writing a 1
to the INTFAULT0 bit in the PWMISC register. If the LATCH
bit is 0 in the PWM0CTL register, writing a 1 to the
INTFAULT0 bit in the PWMISC register has no effect.
0ROINTFAULT016
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x000ROreserved15:4
PWM3 Interrupt Asserted
DescriptionValue
The PWM generator 3 block interrupt has not been asserted.0
The PWM generator 3 block interrupt is asserted.1
The PWM3RIS register shows the source of this interrupt. This bit is
cleared by writing a 1 to the corresponding bit in the PWM3ISC register.
0ROINTPWM33
PWM2 Interrupt Asserted
DescriptionValue
The PWM generator 2 block interrupt has not been asserted.0
The PWM generator 2 block interrupt is asserted.1
The PWM2RIS register shows the source of this interrupt. This bit is
cleared by writing a 1 to the corresponding bit in the PWM2ISC register.
0ROINTPWM22
PWM1 Interrupt Asserted
DescriptionValue
The PWM generator 1 block interrupt has not been asserted.0
The PWM generator 1 block interrupt is asserted.1
The PWM1RIS register shows the source of this interrupt. This bit is
cleared by writing a 1 to the corresponding bit in the PWM1ISC register.
0ROINTPWM11
1695June 18, 2014
Texas Instruments-Production Data
Tiva
TM4C1294NCPDT Microcontroller

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Texas Instruments TM4C1294NCPDT and is the answer not in the manual?

Texas Instruments TM4C1294NCPDT Specifications

General IconGeneral
BrandTexas Instruments
ModelTM4C1294NCPDT
CategoryMicrocontrollers
LanguageEnglish

Related product manuals