Texas Instruments TM4C1294NCPDT - Page 1714

DescriptionResetTypeNameBit/Field
Trigger for Counter=PWMnCMPB Up
DescriptionValue
No ADC trigger is output.0
An ADC trigger pulse is output when the counter matches the
value in the PWMnCMPB register value while counting up.
1
0RWTRCMPBU12
Trigger for Counter=PWMnCMPA Down
DescriptionValue
No ADC trigger is output.0
An ADC trigger pulse is output when the counter matches the
value in the PWMnCMPA register value while counting down.
1
0RWTRCMPAD11
Trigger for Counter=PWMnCMPA Up
DescriptionValue
No ADC trigger is output.0
An ADC trigger pulse is output when the counter matches the
value in the PWMnCMPA register value while counting up.
1
0RWTRCMPAU10
Trigger for Counter=PWMnLOAD
DescriptionValue
No ADC trigger is output.0
An ADC trigger pulse is output when the counter matches the
PWMnLOAD register.
1
0RWTRCNTLOAD9
Trigger for Counter=0
DescriptionValue
No ADC trigger is output.0
An ADC trigger pulse is output when the counter is 0.1
0RWTRCNTZERO8
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x0ROreserved7:6
Interrupt for Counter=PWMnCMPB Down
DescriptionValue
No interrupt.0
A raw interrupt occurs when the counter matches the value in
the PWMnCMPB register value while counting down.
1
0RWINTCMPBD5
June 18, 20141714
Texas Instruments-Production Data
Pulse Width Modulator (PWM)