Texas Instruments TM4C1294NCPDT - Page 1734

DescriptionResetTypeNameBit/Field
Fault2 Input
DescriptionValue
The Fault2 signal is suppressed and cannot generate a fault
condition.
0
The Fault2 signal value is ORed with all other fault condition
generation inputs (Faultn signals and digital comparators).
1
Note: The FLTSRC bit in the PWMnCTL register must be set for this
bit to affect fault condition generation.
0RWFAULT22
Fault1 Input
DescriptionValue
The Fault1 signal is suppressed and cannot generate a fault
condition.
0
The Fault1 signal value is ORed with all other fault condition
generation inputs (Faultn signals and digital comparators).
1
Note: The FLTSRC bit in the PWMnCTL register must be set for this
bit to affect fault condition generation.
0RWFAULT11
Fault0 Input
DescriptionValue
The Fault0 signal is suppressed and cannot generate a fault
condition.
0
The Fault0 signal value is ORed with all other fault condition
generation inputs (Faultn signals and digital comparators).
1
Note: The FLTSRC bit in the PWMnCTL register must be set for this
bit to affect fault condition generation.
0RWFAULT00
June 18, 20141734
Texas Instruments-Production Data
Pulse Width Modulator (PWM)