Texas Instruments TM4C1294NCPDT - Page 1736

DescriptionResetTypeNameBit/Field
Digital Comparator 6
DescriptionValue
The trigger from digital comparator 6 is suppressed and cannot
generate a fault condition.
0
The trigger from digital comparator 6 is ORed with all other fault
condition generation inputs (Faultn signals and digital
comparators).
1
Note: The FLTSRC bit in the PWMnCTL register must be set for this
bit to affect fault condition generation.
0RWDCMP66
Digital Comparator 5
DescriptionValue
The trigger from digital comparator 5 is suppressed and cannot
generate a fault condition.
0
The trigger from digital comparator 5 is ORed with all other fault
condition generation inputs (Faultn signals and digital
comparators).
1
Note: The FLTSRC bit in the PWMnCTL register must be set for this
bit to affect fault condition generation.
0RWDCMP55
Digital Comparator 4
DescriptionValue
The trigger from digital comparator 4 is suppressed and cannot
generate a fault condition.
0
The trigger from digital comparator 4 is ORed with all other fault
condition generation inputs (Faultn signals and digital
comparators).
1
Note: The FLTSRC bit in the PWMnCTL register must be set for this
bit to affect fault condition generation.
0RWDCMP44
Digital Comparator 3
DescriptionValue
The trigger from digital comparator 3 is suppressed and cannot
generate a fault condition.
0
The trigger from digital comparator 3 is ORed with all other fault
condition generation inputs (Faultn signals and digital
comparators).
1
Note: The FLTSRC bit in the PWMnCTL register must be set for this
bit to affect fault condition generation.
0RWDCMP33
June 18, 20141736
Texas Instruments-Production Data
Pulse Width Modulator (PWM)