Table 27-24. Crystal Parameters (continued)
WC Dl (μW)
Recommended
Component
Values
Crystal Parameters
Crystal Spec
(Tolerance /
Stability)
Freq (MHz)
PKG Size
(mm x mm)
Holder
MFG Part#
MFG
Max ValuesTypical Values
Rs (kΩ)
C
2
(pF)
C
1
(pF)
C
L
(pf)
Max Dl (µW)
ESR (Ω)
L1 (mH)
C1 (fF)
C0 (pF)
37001414105008042.304.161.1630/30 ppm125 x 3.24-SMDFQ5032B-12FOX
1432.0
a
121210500509.3011.003.0010/20 ppm167.2 x 5.2ABMMAABMM-
16.0000MHz-
10-D-1-X-T
Abracon
1392.0
a
1212101000508.112.73.0015/30 ppm1613.3 x 4.85HC-49/UPECX-6595-
16.000M
Ecliptek
1882121282008033.902.901.0020/30 ppm163.2 x 2.5NX3225GANX3225GA-
16.000MHZ-
STD-CRG-2
NDK
437010108500120
b
25.903.821.0230/50ppm165 x 3.2NX5032GANX5032GA-
16.000MHZ-
LN-CD-1
NDK
2890.5121293006025.843.901.4710/10 ppm164 x 2.5ECX-42ECS-160-9-42-
CKM-TR
ECS
1582.0
a
121210500503.7011.003.0010/20 ppm257.2 x 5.2ABMMAABMM-
25.0000MHz-
10-D-1-X-T
Abracon
1591.5
a
1212101000403.212.83.0015/30 ppm2513.3 x 4.85HC-49/UPECX-6593-
25.000M
Ecliptek
181212128200508.704.701.1020/30 ppm253.2 x 2.5NX3225GANX3225GA-
25.000MHZ-
STD-CRG-2
NDK
2161.0
a
1010
8500707.15.11.330/50 ppm255 x 3.2NX5032GA
NX5032GA-
25.000MHZ-
LD-CD-1
NDK
2690.75
c
1212
3311161612500508.345.011.5830/30 ppm253.2 x 2.5HC3225/4Q-25.000M-
HC3225/4-
F-30-30-E-12-TR
AURIS
4330.5141410500505.137.921.6930/30 ppm255 x 3.24-SMDFQ5032B-25FOX
1242.0
c
121210350306.16.72.020/25 ppm255 x 3.2NX5032GA7A2570018TXC
a. R
S
values as low as 0 Ohms can be used. Using a lower R
S
value will result in the WC DL to increase towards the Max DL of the crystal.
b. Although this ESR value is outside of the recommended crystal ESR maximum for this frequency, this crystal has been simulated to
confirm proper operation and is valid for use with this device.
c. R
S
values as low as 500 Ohms can be used. Using a lower R
S
value will result in the WC DL to increase towards the Max DL of the
crystal.
1841June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller
To Next Page
Loading...
Need help?
General
