DescriptionResetTypeNameBit/Field
Access Raw Interrupt Status
DescriptionValue
No access has tried to improperly program or erase the Flash
memory.
0
A program or erase action was attempted on a block of Flash
memory that contradicts the protection policy for that block as
set in the FMPPEn registers.
1
This status is sent to the interrupt controller when the AMASK bit in the
FCIM register is set.
This bit is cleared by writing a 1 to the AMISC bit in the FCMISC register.
0ROARIS0
June 18, 2014632
Texas Instruments-Production Data
Internal Memory
To Next Page
Loading...
