DescriptionResetTypeNameBit/Field
Protection Control
The Protection bits control what context is needed for reading and writing
the block selected by the EEBLOCK register, or if block 0 is selected,
all blocks. The following values are allowed:
DescriptionValue
This setting is the default.
Without password: the block is not protected and is readable
and writable at any time.
With password: the block is readable, but only writable when
unlocked.
0x0
With password: the block is readable or writable only when
unlocked.
This value has no meaning when there is no password.
0x1
Without password: the block is readable, not writable.
With password: the block is readable only when unlocked, but
is not writable under any conditions.
0x2
Reserved0x3
0x0RWPROT2:0
661June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller
To Next Page
Loading...
Need help?
General
