DescriptionResetTypeNameBit/Field
Mode Select
DescriptionValue
General Purpose
General-Purpose mode. Control, address, and data pins are
configured using the EPIGPCFG and EPIGPCFG2 registers.
0x0
SDRAM
Supports SDR SDRAM. Control, address, and data pins are
configured using the EPISDRAMCFG register.
0x1
8-Bit Host-Bus (HB8)
Host-bus 8-bit interface (also known as the MCU interface).
Control, address, and data pins are configured using the
EPIHB8CFG and EPIHB8CFG2 registers.
0x2
16-Bit Host-Bus (HB16)
Host-bus 16-bit interface (standard SRAM). Control, address,
and data pins are configured using the EPIHB16CFG and
EPIHB16CFG2 registers.
0x3
Reserved0x3-0xF
0x0RWMODE3:0
June 18, 2014858
Texas Instruments-Production Data
External Peripheral Interface (EPI)
To Next Page
Loading...
