DescriptionResetTypeNameBit/Field
CS2n Baud Rate Counter 0
This bit field contains a counter used to divide the system clock by the
count.
A count of 0 means the system clock is unchanged.
This bit field is only valid when quad chip selects are enabled by setting
the CSCFGEXT to 1 and the CSCFG field to 0x1 or 0x2. In addition, the
CSBAUD bit must be set in the EPIHBnCFG2 register.
0x0000RWCOUNT015:0
June 18, 2014862
Texas Instruments-Production Data
External Peripheral Interface (EPI)
To Next Page
Loading...
