DescriptionResetTypeNameBit/Field
CS2n Host Bus Sub-Mode
This field determines which Host Bus 16 sub-mode to use for CS2n in
multiple chip select mode.
Sub-mode use is determined by the connected external peripheral. See
Table 11-9 on page 833 for information on how this bit field affects the
operation of the EPI signals.
Note: The CSBAUD bit must be set to enable this CS2n MODE field.
If CSBAUD is clear, all chip-selects use the MODE configuration
defined in the EPIHB16CFG register.
DescriptionValue
ADMUX – AD[15:0]
Data and Address are muxed.
0x0
ADNONMUX – D[15:0]
Data and address are separate. This mode is not practical in
HB16 mode for normal peripherals because there are
generally not enough address bits available.
0x1
reserved0x2-0x3
0x0RWMODE1:0
921June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller
To Next Page
Loading...
Need help?
General
