EasyManua.ls Logo

Texas Instruments TM4C1294NCPDT - Page 928

Texas Instruments TM4C1294NCPDT
1890 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DescriptionResetTypeNameBit/Field
CS3n Host Bus Sub-Mode
This field determines which Host Bus 16 sub-mode to use for CS3n in
multiple chip select mode.
Sub-mode use is determined by the connected external peripheral. See
Table 11-9 on page 833 for information on how this bit field affects the
operation of the EPI signals.
Note: The CSBAUD bit must be set to enable this CS3n MODE field.
If CSBAUD is clear, all chip-selects use the MODE configuration
defined in the EPIHB16CFG register.
DescriptionValue
ADMUX AD[15:0]
Data and Address are muxed.
0x0
ADNONMUX D[15:0]
Data and address are separate. This mode is not practical in
HB16 mode for normal peripherals because there are
generally not enough address bits available.
0x1
reserved0x2-0x3
0x0RWMODE1:0
June 18, 2014928
Texas Instruments-Production Data
External Peripheral Interface (EPI)

Table of Contents

Related product manuals