EasyManua.ls Logo

Texas Instruments TM4C1294NCPDT - Page 1151

Texas Instruments TM4C1294NCPDT
1890 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DescriptionResetTypeNameBit/Field
Digital Comparator Interrupt 5
DescriptionValue
No effect.0
Resets the Digital Comparator 5 interrupt unit to its initial
conditions.
1
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
0WODCINT55
Digital Comparator Interrupt 4
DescriptionValue
No effect.0
Resets the Digital Comparator 4 interrupt unit to its initial
conditions.
1
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
0WODCINT44
Digital Comparator Interrupt 3
DescriptionValue
No effect.0
Resets the Digital Comparator 3 interrupt unit to its initial
conditions.
1
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
0WODCINT33
Digital Comparator Interrupt 2
DescriptionValue
No effect.0
Resets the Digital Comparator 2 interrupt unit to its initial
conditions.
1
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
0WODCINT22
1151June 18, 2014
Texas Instruments-Production Data
Tiva
TM4C1294NCPDT Microcontroller

Table of Contents

Related product manuals