DescriptionResetTypeNameBit/Field
Digital Comparator Interrupt 1
DescriptionValue
No effect.0
Resets the Digital Comparator 1 interrupt unit to its initial
conditions.
1
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
0WODCINT11
Digital Comparator Interrupt 0
DescriptionValue
No effect.0
Resets the Digital Comparator 0 interrupt unit to its initial
conditions.
1
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
0WODCINT00
June 18, 20141152
Texas Instruments-Production Data
Analog-to-Digital Converter (ADC)
To Next Page
Loading...
