DescriptionResetTypeNameBit/Field
Write a Word into Flash Memory
This bit is used to write a word into Flash memory and to monitor the
progress of that process.
DescriptionValue
A write of 0 has no effect on the state of this bit.
When read, a 0 indicates that the previous write update access
is complete.
0
Set this bit to write the data stored in the FMD register into the
Flash memory location specified by the contents of the FMA
register.
When read, a 1 indicates that the write update access is not
complete.
1
For information on programming time, see “Flash Memory” on page 1847.
0RWWRITE0
629June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller
To Next Page
Loading...
Need help?
General
