DescriptionResetTypeNameBit/Field
GPTM Timer B Match Raw Interrupt
DescriptionValue
The match value has not been reached.0
The TBMIE bit is set in the GPTMTBMR register, and the match
values in the GPTMTBMATCHR and (optionally) GPTMTBPMR
registers have been reached when configured in one-shot or
periodic mode.
1
This bit is cleared by writing a 1 to the TBMCINT bit in the GPTMICR
register.
0ROTBMRIS11
GPTM Timer B Capture Mode Event Raw Interrupt
DescriptionValue
The capture mode event for Timer B has not occurred.0
A capture mode event has occurred for Timer B. This interrupt
asserts when the subtimer is configured in Input Edge-Time
mode.
1
This bit is cleared by writing a 1 to the CBECINT bit in the GPTMICR
register.
0ROCBERIS10
GPTM Timer B Capture Mode Match Raw Interrupt
DescriptionValue
The capture mode match for Timer B has not occurred.0
The capture mode match has occurred for Timer B. This interrupt
asserts when the values in the GPTMTBR and GPTMTBPR
match the values in the GPTMTBMATCHR and GPTMTBPMR
when configured in Input Edge-Time mode.
1
This bit is cleared by writing a 1 to the CBMCINT bit in the GPTMICR
register.
0ROCBMRIS9
GPTM Timer B Time-Out Raw Interrupt
DescriptionValue
Timer B has not timed out.0
Timer B has timed out. This interrupt is asserted when a
one-shot or periodic mode timer reaches it's count limit (0 or
the value loaded into GPTMTBILR, depending on the count
direction).
1
This bit is cleared by writing a 1 to the TBTOCINT bit in the GPTMICR
register.
0ROTBTORIS8
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved7:6
GPTM Timer A DMA Done Raw Interrupt Status
DescriptionValue
The Timer A DMA transfer has not completed.0
The Timer A DMA transfer has completed.1
0RODMAARIS5
997June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller
To Next Page
Loading...
Need help?
General
