Texas Instruments TM4C1294NCPDT - Page 1789

Table 26-3. Signals by Signal Name (continued)
DescriptionBuffer TypePin TypePin Mux / Pin
Assignment
Pin NumberPin Name
Motion Control Module 0 PWM 1. This signal is
controlled by Module 0 PWM Generator 0.
TTLOPF1 (6)43M0PWM1
Motion Control Module 0 PWM 2. This signal is
controlled by Module 0 PWM Generator 1.
TTLOPF2 (6)44M0PWM2
Motion Control Module 0 PWM 3. This signal is
controlled by Module 0 PWM Generator 1.
TTLOPF3 (6)45M0PWM3
Motion Control Module 0 PWM 4. This signal is
controlled by Module 0 PWM Generator 2.
TTLOPG0 (6)49M0PWM4
Motion Control Module 0 PWM 5. This signal is
controlled by Module 0 PWM Generator 2.
TTLOPG1 (6)50M0PWM5
Motion Control Module 0 PWM 6. This signal is
controlled by Module 0 PWM Generator 3.
TTLOPK4 (6)63M0PWM6
Motion Control Module 0 PWM 7. This signal is
controlled by Module 0 PWM Generator 3.
TTLOPK5 (6)62M0PWM7
Non-maskable interrupt.TTLIPD7 (8)128NMI
Main oscillator crystal input or an external clock
reference input.
AnalogIfixed88OSC0
Main oscillator crystal output. Leave unconnected
when using a single-ended clock source.
AnalogOfixed89OSC1
GPIO port A bit 0.TTLI/O-33PA0
GPIO port A bit 1.TTLI/O-34PA1
GPIO port A bit 2.TTLI/O-35PA2
GPIO port A bit 3.TTLI/O-36PA3
GPIO port A bit 4.TTLI/O-37PA4
GPIO port A bit 5.TTLI/O-38PA5
GPIO port A bit 6.TTLI/O-40PA6
GPIO port A bit 7.TTLI/O-41PA7
GPIO port B bit 0.TTLI/O-95PB0
GPIO port B bit 1.TTLI/O-96PB1
GPIO port B bit 2.TTLI/O-91PB2
GPIO port B bit 3.TTLI/O-92PB3
GPIO port B bit 4.TTLI/O-121PB4
GPIO port B bit 5.TTLI/O-120PB5
GPIO port C bit 0.TTLI/O-100PC0
GPIO port C bit 1.TTLI/O-99PC1
GPIO port C bit 2.TTLI/O-98PC2
GPIO port C bit 3.TTLI/O-97PC3
GPIO port C bit 4.TTLI/O-25PC4
GPIO port C bit 5.TTLI/O-24PC5
GPIO port C bit 6.TTLI/O-23PC6
GPIO port C bit 7.TTLI/O-22PC7
GPIO port D bit 0.TTLI/O-1PD0
GPIO port D bit 1.TTLI/O-2PD1
1789June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller