Texas Instruments AFE79 Series - 2.16.59 Register 24 Dh (offset = 24 Dh) [reset = 2 h]; 2.16.60 Register 24 Eh (offset = 24 Eh) [reset = 0 h]; 2.16.61 Register 250 h (offset = 250 h) [reset = 1 h]

www.ti.com IO Wrap Register Map
1015
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-2337. Register 24C Field Descriptions
Bit Field Type Reset Description
2-0
PULL_CTRL_GPIO
_19
R/W 1h
Bit 0 indicates Pull up enable.
Bit <1> Indicates Pull value.
Bit <2> is unused.
2.16.59 Register 24Dh (offset = 24Dh) [reset = 2h]
Figure 2-2322. Register 24Dh
7 6 5 4 3 2 1 0
IBUF_ST_GPIO_19
R/W-2h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2338. Register 24D Field Descriptions
Bit Field Type Reset Description
1-0
IBUF_ST_GPIO_1
9
R/W 2h Input buffer signal strength
2.16.60 Register 24Eh (offset = 24Eh) [reset = 0h]
Figure 2-2323. Register 24Eh
7 6 5 4 3 2 1 0
ODRIV_DS_GPIO_19
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2339. Register 24E Field Descriptions
Bit Field Type Reset Description
1-0
ODRIV_DS_GPIO_
19
R/W 0h output buffer drive strength.
2.16.61 Register 250h (offset = 250h) [reset = 1h]
Figure 2-2324. Register 250h
7 6 5 4 3 2 1 0
PULL_CTRL_GPIO_20
R/W-1h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2340. Register 250 Field Descriptions
Bit Field Type Reset Description
2-0
PULL_CTRL_GPIO
_20
R/W 1h
Bit 0 indicates Pull up enable.
Bit <1> Indicates Pull value.
Bit <2> is unused.