www.ti.com
Macro Register Map
587
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-1099. Register 13F Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_RESULT_
REG17[31:24]
R 0h
Macro result register # 17. Interpretation of the contents of this
register depend on the last macro command
2.8.161 Register 193h (offset = 193h) [reset = 0h]
Figure 2-1092. Register 193h
7 6 5 4 3 2 1 0
MACRO_OPCODE
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1100. Register 193 Field Descriptions
Bit Field Type Reset Description
7-0 MACRO_OPCODE R/W 0h
A write to this register triggers a macro operation in the
microcontroller. The 8-bit value indicates the type of the macro
(i.e. macro op-code). This register should be written to after all
macro operand registers are written.
To Next Page
Loading...
