EasyManua.ls Logo

Texas Instruments AFE79 Series - 2.4.207 Register 108 h (offset = 108 h) [reset = 0 h]; 2.4.208 Register 109 h (offset = 109 h) [reset = 0 h]

Texas Instruments AFE79 Series
1268 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DAC JESD Register Map
www.ti.com
340
SBAU337May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-439. Register 107 Field Descriptions
Bit Field Type Reset Description
7-0
ALARMS_CLEAR[
63:56]
R/W 0h
Clear 'alarms' register to the alarm pin; Alarms won't be
generated if '1' so it must be programmed to '0' for alarms to
continue.
[63:56] = SRX4/8 JESD errors
Each of the bits for the above mentioned lane errors are
mapped to :
bit7 = JESDB: multiframe alignment error
bit6 = JESDB: frame alignment error
bit5 = JESDB: link configuration error
bit4 = JESDB: elastic buffer overflow (bad RBD value)
bit3 = JESDB: elastic buffer match error. The first non-/K/
doesnt match 'match_ctrl' and 'match_data' programmed
values
bit2 = JESDB: code synchronization error
bit1 = JESDB: 8b/10b not-in-table code error
Bit0 = JESDB: 8b/10b disparity error
bit7 = JESDC: EoEMB alignment error
bit6 = JESDC: EoMB alignment error
bit5 = JESDC: cmd-data in crc mode not matching with spi
register bits
bit4 = JESDC: elastic buffer overflow (bad RBD value)
bit3 = JESDC: TIED to 0.
bit2 = JESDC: extended multiblock alignment error
bit1 = JESDC: sync-header invalid error ('11' or '00' received
in expected sync header location)
Bit0 = JESDC: sync-header CRC error
Note: Refer to the TI application note for details on error
interpretation.
2.4.207 Register 108h (offset = 108h) [reset = 0h]
Figure 2-436. Register 108h
7 6 5 4 3 2 1 0
ALARMS_TO_PAP_MASK[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-440. Register 108 Field Descriptions
Bit Field Type Reset Description
7-0
ALARMS_TO_PAP
_MASK[7:0]
R/W 0h
Masks 'alarms_to_pap' register effecting pap-alarms; will not
affect alarm read from SPI.
[3:0] = TIED to 0
[4] = JESD shorttest alarm
[5] = TIED to 0
[6] = serdesab_pll_loss_of_lock
[7] = serdescd_pll_loss_of_lock
Note: Refer to the TI application note for details on error
interpretation.
2.4.208 Register 109h (offset = 109h) [reset = 0h]
Figure 2-437. Register 109h
7 6 5 4 3 2 1 0
ALARMS_TO_PAP_MASK[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset

Table of Contents

Related product manuals