Texas Instruments AFE79 Series - 2.11.22 Register 150 h (offset = 150 h) [reset = 0 h]; 2.11.23 Register 151 h (offset = 151 h) [reset = 0 h]; 2.11.24 Register 160 h (offset = 160 h) [reset = 0 h]

Digital Top Register Map www.ti.com
622
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-1207. Register 11B Field Descriptions
Bit Field Type Reset Description
7-0
SPI_READ_ALAR
M_BUS1[31:24]
R 0h
Reads the value of 32 alarms after the mask corresponding to
Alarm1
2.11.22 Register 150h (offset = 150h) [reset = 0h]
Figure 2-1197. Register 150h
7 6 5 4 3 2 1 0
OBS_FUNC_SPI_CHAIN_AUTOLOAD_ERROR OBS_FUNC_SPI_CHAIN_AUTOLOAD_DONE
R-0h R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1208. Register 150 Field Descriptions
Bit Field Type Reset Description
7-4
OBS_FUNC_SPI_
CHAIN_AUTOLOA
D_ERROR
R 0h Observation port for autoload_error
3-0
OBS_FUNC_SPI_
CHAIN_AUTOLOA
D_DONE
R 0h Observation port for autoload_done.
2.11.23 Register 151h (offset = 151h) [reset = 0h]
Figure 2-1198. Register 151h
7 6 5 4 3 2 1 0
OBS_FUNC_S
PI_EFC_INFO
RMATION
OBS_FUNC_S
PI_EFC_ERRO
R
R-0h R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1209. Register 151 Field Descriptions
Bit Field Type Reset Description
1-1
OBS_FUNC_SPI_
EFC_INFORMATI
ON
R 0h Observation port for efc information.
0-0
OBS_FUNC_SPI_
EFC_ERROR
R 0h Observation port for efc_error.
2.11.24 Register 160h (offset = 160h) [reset = 0h]
Figure 2-1199. Register 160h
7 6 5 4 3 2 1 0
OBS_FUNC_SPI_CHAIN_AUTOLOAD_ERROR OBS_FUNC_SPI_CHAIN_AUTOLOAD_DONE
R-0h R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset